agiros-pixiu-clearpath-config (2.8.2-1noble) noble; urgency=high

  * Fix reading arm_id (#204 <https://github.com/clearpathrobotics/clearpath_config/issues/204>)
  * 2.8.1
  * Changes.
  * Fix: Ewellix Parameters (#203 <https://github.com/clearpathrobotics/clearpath_config/issues/203>)
    Add mount parameter and remove redefinition of urdf functions
  * 2.8.0
  * Changes.
  * Add a new platform.wireless section to config (#201 <https://github.com/clearpathrobotics/clearpath_config/issues/201>)
    * Add a new platform.wireless section to contain router, base station, wireless_watcher parameters
    * Fixed linting.
    ---------
    Co-authored-by: Tony Baltovski <mailto:tbaltovski@clearpathrobotics.com>
  * Replace assert with raise + relevant Exception (#200 <https://github.com/clearpathrobotics/clearpath_config/issues/200>)
    * Raise a FileNotFound exception instead of an assertion error if the middleware config path doesn't exist; this makes it easier to catch those exceptions in CI tests. Fix a bug where setting the extra launch to None raises an unintended exception
    * Start replacing all assert CONDITION[, 'error message'] instances with if + raise with more precise exceptions (generally PermissionError, FileNotFoundError, ValueError, or TypeError)
    * Replace more asserts
    * Replace asserts in username. Don't allow underscores; these are not valid in Linux usernames. Verify that the first character is not a digit or hyphen
    * More asserts
    * More asserts
    * More asserts
    * More asserts
    * Fix length check
    * id -> _id
    * .config -> .control
    * UR_TYPE -> UR_TYPES
    * More asserts
    * Finish first pass removing all asserts
    * Missing negative sign
    * Fix wonky indent
    * Fix formatting issues
  * Fix: OakD Parameters (#202 <https://github.com/clearpathrobotics/clearpath_config/issues/202>)
    - Use empty strings as defaults
  * Raise a FileNotFound exception instead of an assertion error if the middleware config path doesn't exist; this makes it easier to catch those exceptions in CI tests. Fix a bug where setting the extra launch to None raises an unintended exception (#199 <https://github.com/clearpathrobotics/clearpath_config/issues/199>)
  * Add system.bash support (#196 <https://github.com/clearpathrobotics/clearpath_config/issues/196>)
    * Add system.bash section to robot.yaml with source and env sub-fields for adding additional bash sources and envars
    * Add new envar to Flir camera sample
  * Allow multiple launch files to be listed in platform.extras.launch, add launch arguments field (#197 <https://github.com/clearpathrobotics/clearpath_config/issues/197>)
  * Add support for automatic discovery range (#191 <https://github.com/clearpathrobotics/clearpath_config/issues/191>)
    * Add ROS_STATIC_PEERS and ROS_AUTOMATIC_DISCOVERY_RANGE setters to middleware
    * Add middleware samples
  * Rename oakd namespace in robot.yaml to luxonis_oakd (#192 <https://github.com/clearpathrobotics/clearpath_config/issues/192>)
  * Contributors: Chris Iverach-Brereton, Tony Baltovski, luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Tue, 16 Dec 2025 05:00:00 -0000

agiros-pixiu-clearpath-config (2.8.1-1noble) noble; urgency=high

  * Fix: Ewellix Parameters (#203 <https://github.com/clearpathrobotics/clearpath_config/issues/203>)
    Add mount parameter and remove redefinition of urdf functions
  * Contributors: luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 06 Nov 2025 05:00:00 -0000

agiros-pixiu-clearpath-config (2.8.0-1noble) noble; urgency=high

  * Add a new platform.wireless section to config (#201 <https://github.com/clearpathrobotics/clearpath_config/issues/201>)
  * Replace assert with raise + relevant Exception (#200 <https://github.com/clearpathrobotics/clearpath_config/issues/200>)
  * Fix: OakD Parameters (#202 <https://github.com/clearpathrobotics/clearpath_config/issues/202>)
    - Use empty strings as defaults
  * Raise a FileNotFound exception instead of an assertion error if the middleware config path doesn't exist; this makes it easier to catch those exceptions in CI tests. Fix a bug where setting the extra launch to None raises an unintended exception (#199 <https://github.com/clearpathrobotics/clearpath_config/issues/199>)
  * Add system.bash support (#196 <https://github.com/clearpathrobotics/clearpath_config/issues/196>)
    * Add system.bash section to robot.yaml with source and env sub-fields for adding additional bash sources and envars
    * Add new envar to Flir camera sample
  * Allow multiple launch files to be listed in platform.extras.launch, add launch arguments field (#197 <https://github.com/clearpathrobotics/clearpath_config/issues/197>)
  * Add support for automatic discovery range (#191 <https://github.com/clearpathrobotics/clearpath_config/issues/191>)
    * Add ROS_STATIC_PEERS and ROS_AUTOMATIC_DISCOVERY_RANGE setters to middleware
    * Add middleware samples
  * Rename oakd namespace in robot.yaml to luxonis_oakd (#192 <https://github.com/clearpathrobotics/clearpath_config/issues/192>)
  * Contributors: Chris Iverach-Brereton, luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 23 Oct 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.7.3-1noble) noble; urgency=high

  * Feature: Kinova Jazzy Support (#193 <https://github.com/clearpathrobotics/clearpath_config/issues/193>)
    * Remove unsupported exception on Kinova
    * Lint and remove unused imports
    * Add arm reference from within arm's gripper
  * Contributors: luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 18 Sep 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.7.2-1noble) noble; urgency=high

  * Fix: URDF Parameters on Kinova and Grippers (#190 <https://github.com/clearpathrobotics/clearpath_config/issues/190>)
    * Add URDF parameters to Kinova and Grippers
    * Lint: Add line
    * Check empty string to allow false boolean
  * Contributors: luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Tue, 16 Sep 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.7.1-1noble) noble; urgency=high

  * Feature: Franka in Jazzy (#189 <https://github.com/clearpathrobotics/clearpath_config/issues/189>)
    * Forward from Humble: Feature Franka
    * Initial Franka arm description
    * Add arm_id property to franka manipulators
    * Add joint count to Franka arm
    * Pass MoveIt delay from config
  * Jazzy Feature: Zed (#188 <https://github.com/clearpathrobotics/clearpath_config/issues/188>)
    * Remove unsupported exception on StereolabsZed
    * Remove unused imports
  * Contributors: luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 08 Sep 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.7.0-1noble) noble; urgency=high

  * Drivetrains (#178 <https://github.com/clearpathrobotics/clearpath_config/issues/178>)
    * Added drivetrain support
    * Split 2wd into fwd and rwd
    * Added samples
    * Renamed drivetrain 'type' to 'control'
    * Split wheels into front and rear
    * Added caster wheel
    * Removed 2WD options for Dingo-O and Ridgeback
    * Changed J100, A200, W200 to 4WD
    * Reset the global serial number variable
    * Fixed A300 sample drivetrain section
    * Added drivetrain to other platform outline samples
    * Fixed Dingo-D control type
    ---------
    Co-authored-by: Luis Camero <mailto:lcamero@clearpathrobotics.com>
  * Add the 2d lidar to the wireless charger (#181 <https://github.com/clearpathrobotics/clearpath_config/issues/181>)
  * Contributors: Chris Iverach-Brereton, Roni Kreinin

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 25 Aug 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.6.3-1noble) noble; urgency=high

  * Ensure MX_ID is passed through (#187 <https://github.com/clearpathrobotics/clearpath_config/issues/187>)
  * Fix: OAK-D Parameters (#186 <https://github.com/clearpathrobotics/clearpath_config/issues/186>)
  * A200 lidar example requires pacs plate (#184 <https://github.com/clearpathrobotics/clearpath_config/issues/184>)
  * Contributors: Hilary Luo, luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 21 Aug 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.6.2-1noble) noble; urgency=high

  * Fix: Overwrite defined values with ROS parameters (#182 <https://github.com/clearpathrobotics/clearpath_config/issues/182>)
    * Overwrite defined values with ROS parameters
    * Remove comment
  * Changed sample username to robot.
  * Contributors: Tony Baltovski, luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Tue, 29 Jul 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.6.1-1noble) noble; urgency=high

  * Forward Fix: Add ur_type parameter to UniversalRobots manipulator (#177 <https://github.com/clearpathrobotics/clearpath_config/issues/177>)
  * Contributors: luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 07 Jul 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.6.0-1noble) noble; urgency=high

  * Feature: All Platforms Supported (#176 <https://github.com/clearpathrobotics/clearpath_config/issues/176>)
    * All platforms are now supported
    * Remove unused dependencies
  * Added sensor sample for phidgets_spatial. (#175 <https://github.com/clearpathrobotics/clearpath_config/issues/175>)
  * Enable foxglove bridge by default (#173 <https://github.com/clearpathrobotics/clearpath_config/issues/173>)
  * Add A300 AMP attachments, samples (#158 <https://github.com/clearpathrobotics/clearpath_config/issues/158>)
    * Add attachments for A300 Observer
    * Add A300 Observer sample
    * Add parameters to set the Ouster OS-1 base & cap type
    * Add spotlight attachment
  * Contributors: Chris Iverach-Brereton, Hilary Luo, Tony Baltovski, luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Fri, 04 Jul 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.5.0-1noble) noble; urgency=high

  * Fix: PACS Limits (#171 <https://github.com/clearpathrobotics/clearpath_config/issues/171>)
  * Add foxglove bridge enable to platform section (#169 <https://github.com/clearpathrobotics/clearpath_config/issues/169>)
  * Add enable setting for wireless-watcher (#170 <https://github.com/clearpathrobotics/clearpath_config/issues/170>)
  * Feature: CAN Bridge Parameters (#166 <https://github.com/clearpathrobotics/clearpath_config/issues/166>)
  * Add cap_type parameter to the OS1 sample since it's supported (#163 <https://github.com/clearpathrobotics/clearpath_config/issues/163>)
  * Fix/issue typos (#168 <https://github.com/clearpathrobotics/clearpath_config/issues/168>)
  * Contributors: Chris Iverach-Brereton, Hilary Luo, luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 29 May 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.4.0-1noble) noble; urgency=high

  * Keep default can_bridge entries (#160 <https://github.com/clearpathrobotics/clearpath_config/issues/160>)
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 01 May 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.3.1-1noble) noble; urgency=high

  * Fixed the Husky A300 serial sample to match the real serial.
  * Contributors: Tony Baltovski

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 28 Apr 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.3.0-1noble) noble; urgency=high

  * Added a single Hokuyo laser to default R100 sample. (#157 <https://github.com/clearpathrobotics/clearpath_config/issues/157>)
  * Maintain default can adapters but allow overwriting if matching names (#155 <https://github.com/clearpathrobotics/clearpath_config/issues/155>)
  * Feature: Wiferion Charger (#154 <https://github.com/clearpathrobotics/clearpath_config/issues/154>)
  * Feature: Add CAN adapters  (#153 <https://github.com/clearpathrobotics/clearpath_config/issues/153>)
  * Rename camera IMU topics from imu to imu/data_raw (per RPSW-2503) (#150 <https://github.com/clearpathrobotics/clearpath_config/issues/150>)
  * Feature: Add delay to manipulator controller (#146 <https://github.com/clearpathrobotics/clearpath_config/issues/146>)
  * Feature: Manipulator URDF Parameters (#145 <https://github.com/clearpathrobotics/clearpath_config/issues/145>)
  * Feature: MoveIt Parameters and Enable (#144 <https://github.com/clearpathrobotics/clearpath_config/issues/144>)
  * Fast-Forward Feature: Manipulator Samples and Poses (#143 <https://github.com/clearpathrobotics/clearpath_config/issues/143>)
  * Removed J100 from unsupported platforms (#149 <https://github.com/clearpathrobotics/clearpath_config/issues/149>)
  * Changed all sensor samples to the Husky A300. (#148 <https://github.com/clearpathrobotics/clearpath_config/issues/148>)
  * Add support for INS sensors + Fixposition XVN (#142 <https://github.com/clearpathrobotics/clearpath_config/issues/142>)
  * Removed Dingo and Ridgeback from unsupported exception (#137 <https://github.com/clearpathrobotics/clearpath_config/issues/137>)
  * Contributors: Chris Iverach-Brereton, Roni Kreinin, Tony Baltovski, Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Fri, 11 Apr 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.2.2-1noble) noble; urgency=high

  * Updated the parent link of the base IMU on the A300.
  * Contributors: Tony Baltovski

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 27 Mar 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.2.1-1noble) noble; urgency=high

  * Added battery to A300 samples.
  * Contributors: Tony Baltovski

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 17 Mar 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.2.0-1noble) noble; urgency=high

  * Feature Jazzy Ouster (#132 <https://github.com/clearpathrobotics/clearpath_config/issues/132>)
    * Add OusterOS1
    * Add ouster sample
    * Alphabetical entries to Lidar3D models
  * Add D455, D456 to supported devices (#136 <https://github.com/clearpathrobotics/clearpath_config/issues/136>)
  * Add support for OAK-D Pro W PoE (#135 <https://github.com/clearpathrobotics/clearpath_config/issues/135>)
    * Add OAK-D Pro W PoE to sensor types. Add IP address field to OAK-D camera class, defaulting to None (for non-PoE models). Add a new assertion to validate IPv4 addresses
    * Support the device_type parameter for OAK-D cameras
    * Add i_mx_id, i_ip for identifying multiple cameras. Fix serial so it maps to i_usb_port_id
    * Rename variable to avoid overwriting python builtin
    * Allow empty strings as well as None for the IP address
    * Add assert_is_ipv4_address to BaseSensor
  * Add URDF-only support for the Seyond Robin W (#131 <https://github.com/clearpathrobotics/clearpath_config/issues/131>)
    * Add the SeyondLidar class
    * Add sample for the Seyond Robin W
  * Contributors: Chris Iverach-Brereton, luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Tue, 11 Mar 2025 04:00:00 -0000

agiros-pixiu-clearpath-config (2.1.1-1noble) noble; urgency=high

  * Fixed docs link for Robot YAML. (#124 <https://github.com/clearpathrobotics/clearpath_config/issues/124>)
  * Updated the A300's default IMU location.
  * Contributors: Tony Baltovski

 -- Luis Camero <lcamero@clearpathrobotics.com>  Wed, 05 Feb 2025 05:00:00 -0000

agiros-pixiu-clearpath-config (2.1.0-1noble) noble; urgency=high

  * Jazzy Phidgets IMU Filter (#119 <https://github.com/clearpathrobotics/clearpath_config/issues/119>)
    * Add filter to IMU entry
    * Enable mag only for Phidgets
    * Add DATA topic to Phidget
  * Add the phidget to default sample (#120 <https://github.com/clearpathrobotics/clearpath_config/issues/120>)
  * Change default user to robot (#121 <https://github.com/clearpathrobotics/clearpath_config/issues/121>)
  * Feature/diagnostics (#117 <https://github.com/clearpathrobotics/clearpath_config/issues/117>)
    * Switched class (shared) variables to non-muteable types to prevent unexpected behaviour if they were ever changed
    * Remove redundant getters and setters
    * Remove duplicate variable definition
    * Add topic message type and correct rates so they are not shared muteable variables
  * Ewellix Lift (#115 <https://github.com/clearpathrobotics/clearpath_config/issues/115>)
    * Added Ewellix Lift (#109 <https://github.com/clearpathrobotics/clearpath_config/issues/109>)
    * Initial add of lifts to config
    * Added ewellix parameters
    * Fix lint
  * Removed deprecated parameters
  * Contributors: Hilary Luo, Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Fri, 31 Jan 2025 05:00:00 -0000

agiros-pixiu-clearpath-config (2.0.1-1noble) noble; urgency=high

  * Add Zenoh support (#113 <https://github.com/clearpathrobotics/clearpath_config/issues/113>)
    * Add Zenoh to the list of supported RMW implementations
    * Add zenoh_router_config_uri parameter to middleware config
    * Add a sanity check to make sure we aren't trying to use Zenoh on a MicroROS-using platform
    * Allow Zenoh on generic platforms
  * Contributors: Chris Iverach-Brereton

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 16 Jan 2025 05:00:00 -0000

agiros-pixiu-clearpath-config (2.0.0-1noble) noble; urgency=high

  * Add HE2410 & HE2411 battery support (#110 <https://github.com/clearpathrobotics/clearpath_config/issues/110>) (#111 <https://github.com/clearpathrobotics/clearpath_config/issues/111>)
    * Add support for the HE2410 and HE2411 batteries to J100 and A200
  * Fixed tests.
  * Add additional controllers (#105 <https://github.com/clearpathrobotics/clearpath_config/issues/105>)
    * Add Xbox controller support
    * Add PS5 controller support
  * Add enable_ekf property to platform (#106 <https://github.com/clearpathrobotics/clearpath_config/issues/106>)
  * Re-add the A200/A201 Observer sample now that https://github.com/clearpathrobotics/clearpath_common/pull/122 is merged (#107 <https://github.com/clearpathrobotics/clearpath_config/issues/107>)
  * Fix failing tests (#104 <https://github.com/clearpathrobotics/clearpath_config/issues/104>)
    * Remove the husky observer sample; it depends on as-yet-unmerged changes to clearpath_common
    * Flag the Zed camera as unsupported for now
    * Skip any additional tests if there's an unsupported platform or accessory in the sample
  * Fix the Axis camera topics (#100 <https://github.com/clearpathrobotics/clearpath_config/issues/100>)
  * Raise an UnsupportedPlatformException for the Jackal (for now); we don't have Jazzy firmware for it yet (#103 <https://github.com/clearpathrobotics/clearpath_config/issues/103>)
  * A300 VCAN (#102 <https://github.com/clearpathrobotics/clearpath_config/issues/102>)
    * A300 vcan0 bridge
    * Disable vcan1 bridge for now
  * Fix support for the device_type parameter; previously the camera would always be a Q62 (#99 <https://github.com/clearpathrobotics/clearpath_config/issues/99>)
  * Add the A200 Observer backpack attachment (#96 <https://github.com/clearpathrobotics/clearpath_config/issues/96>)
    * Add the A200 Observer backpack attachment
    * Add the Husky Observer sample
    * Add the IMU to the sample
    * Add source CI
    * Linting for new CI
    * More linting
    * Silently replace the A201 prefix with A200; this lets us support the Observer with minimal changes elsewhere (and the number of A201 bases is very small)
    * Update the Observer sample to use the A201 serial numbers
  * Add A300 samples (#98 <https://github.com/clearpathrobotics/clearpath_config/issues/98>)
    * Add the AMP mount attachment
    * Add A300 samples
    * Add the outline sample
    * Add AMP frame to sample
  * Bugfix MODEL.keys() (#97 <https://github.com/clearpathrobotics/clearpath_config/issues/97>)
  * A300 battery comment to LiFEPO4
  * Fix all linting errors
  * Add a300 extra ros parameters
  * Add a300 to attachment mux
  * Add a300 platform empty ros parameters
  * Add a300 can interfaces
  * Add a300 platform battery
  * Add a300 platform attachments
  * Add A300 platform entry
  * Add the ability to flag previously-supported accessories & platforms as not (currently) supported (#86 <https://github.com/clearpathrobotics/clearpath_config/issues/86>)
    * Add initial support for flagging unsupported accessories (e.g. Kinova arms, whose binary drivers don't exist in Jazzy yet)
    * classmethod -> staticmethod
    * Use the ROS_DISTRO variable from clearpath_generator_common instead of hard-coding the distro
    * Start fixing up python linter errors, code formatting, replace % strings with f'' strings.
    * Finish first-pass replacing " -> '
    * Fix remaining linter errors. Some tests are still failing, but the major code tidying-up should be done now
    * Fix type -> _type
    * Update CI for Jazy
    * Update Python package workflow for Jazzy
    * Remove dependency on clearpath_generator_common; doing so creates a circular dependency. Instead use the system level envar
    * Add the ability to flag whole platforms as deprecated and/or unsupported
    * Docs
    * Fix imperative tone, missing periods in docstrings, missing newline at end of file
    * Mark everything besides Jackal and Husky as presently unsupported
    * Fix up sample yaml formatting. Remove unmatched quotation marks, restructure to avoid foo.bar.spam: eggs notation
    * Fix quotation marks for the sample serial number
  * Add default vcan ROS interfaces based on platform
  * Add support for Axis cameras (#90 <https://github.com/clearpathrobotics/clearpath_config/issues/90>)
    * Add the initial AxisCamera class with all ROS parameters defined in axis_camera's launch files & nodes
    * Remove duplicate argument
    * Add the AxisCamera class to the sensors generator
    * Add the serial to the axis camera's template
    * Add serial to the template keys too
    * Add serial getter/setter. Use empty string as default serial
    * Refactoring, set the property to the value for the template
    * frame_width -> width, frame_height -> height
    * Rename setter
    * Make the scales & offsets floats by default
    * Add the TF prefix parameter
    * Add the camera_info_url parameter
    * camera_num -> camera
    * Note that the serial isn't used, fix the name of the PTZ teleop parameter
    * Add the remaining camera topics to the Topics object
    * image_raw -> image
    * Add axis_camera sample
    * Linting fixes
    * End docstring with .
  * Add ur_arm
  * Add a sample for each sensor
  * Add default vcan ROS interfaces based on platform
  * Add support for Axis cameras (#90 <https://github.com/clearpathrobotics/clearpath_config/issues/90>)
    * Add the initial AxisCamera class with all ROS parameters defined in axis_camera's launch files & nodes
    * Remove duplicate argument
    * Add the AxisCamera class to the sensors generator
    * Add the serial to the axis camera's template
    * Add serial to the template keys too
    * Add serial getter/setter. Use empty string as default serial
    * Refactoring, set the property to the value for the template
    * frame_width -> width, frame_height -> height
    * Rename setter
    * Make the scales & offsets floats by default
    * Add the TF prefix parameter
    * Add the camera_info_url parameter
    * camera_num -> camera
    * Note that the serial isn't used, fix the name of the PTZ teleop parameter
    * Add the remaining camera topics to the Topics object
    * image_raw -> image
    * Add axis_camera sample
    * Linting fixes
    * End docstring with .
  * Remove empty line at EoF
  * Add header
  * rx and tx topics for can bridge
  * Initial can_bridges add
  * Add ur_arm
  * Add a sample for each sensor
  * Add the ability to flag previously-supported accessories & platforms as not (currently) supported (#86 <https://github.com/clearpathrobotics/clearpath_config/issues/86>)
    * Add initial support for flagging unsupported accessories (e.g. Kinova arms, whose binary drivers don't exist in Jazzy yet)
    * classmethod -> staticmethod
    * Use the ROS_DISTRO variable from clearpath_generator_common instead of hard-coding the distro
    * Start fixing up python linter errors, code formatting, replace % strings with f'' strings.
    * Finish first-pass replacing " -> '
    * Fix remaining linter errors. Some tests are still failing, but the major code tidying-up should be done now
    * Fix type -> _type
    * Update CI for Jazy
    * Update Python package workflow for Jazzy
    * Remove dependency on clearpath_generator_common; doing so creates a circular dependency. Instead use the system level envar
    * Add the ability to flag whole platforms as deprecated and/or unsupported
    * Docs
    * Fix imperative tone, missing periods in docstrings, missing newline at end of file
    * Mark everything besides Jackal and Husky as presently unsupported
    * Fix up sample yaml formatting. Remove unmatched quotation marks, restructure to avoid foo.bar.spam: eggs notation
    * Fix quotation marks for the sample serial number
  * Removed line at EOF
  * Add header
  * Merge pull request #82 <https://github.com/clearpathrobotics/clearpath_config/issues/82> from clearpathrobotics/lcamero/phidgets_spatial
    Add phidgets spatial to config
  * Add OAKD
  * rx and tx topics for can bridge
  * Initial can_bridges add
  * Contributors: Chris Iverach-Brereton, Luis Camero, Roni Kreinin, Tony Baltovski, Yoan Mollard

 -- Luis Camero <lcamero@clearpathrobotics.com>  Tue, 14 Jan 2025 05:00:00 -0000

agiros-pixiu-clearpath-config (0.3.4-1noble) noble; urgency=high

  * Add OAKD
  * Add phidgets spatial to config
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Fri, 04 Oct 2024 04:00:00 -0000

agiros-pixiu-clearpath-config (0.3.3-1noble) noble; urgency=high

  * Allow all parameters to be modified
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Sun, 29 Sep 2024 04:00:00 -0000

agiros-pixiu-clearpath-config (0.3.2-1noble) noble; urgency=high

  * Alphabetically order packages
  * Add manipulators to setup
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 23 Sep 2024 04:00:00 -0000

agiros-pixiu-clearpath-config (0.3.1-1noble) noble; urgency=high

  * Fix battery in r100 sample
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 19 Sep 2024 04:00:00 -0000

agiros-pixiu-clearpath-config (0.3.0-1noble) noble; urgency=high

  * Add samples to setup.py
  * Remove empty line in D150 attachments
  * Height parameters for tower shoulder
  * FAMS, HAMS, and Tower as separate attachments
  * Add height parameter to Dingo top plate
  * Add samples for Dingo O and Ridgeback
  * 0.3 Release Candidate with Main Changes (#73 <https://github.com/clearpathrobotics/clearpath_config/issues/73>)
    * Renamed node to intel_realsense in config
    * Changes.
    * 0.2.8
    * Added Zed as type of camera
    * Added Zed to configuration
    * Changes.
    * 0.2.9
    * Updated Realsense parameters
    * Updated Microstrain link parameter
    * Changes.
    * 0.2.10
    * Adds GQ7 as possible sensor
    * Changes.
    * 0.2.11
    ---------
    Co-authored-by: Tony Baltovski <mailto:tbaltovski@clearpathrobotics.com>
    Co-authored-by: robbiefish <mailto:rob.fisher@hbkworld.com>
  * Fix ridgeback battery configuration
  * 0.2.8
  * Changes.
  * Renamed node to intel_realsense in config
  * 0.2.7
  * Changes.
  * W200 attachments default to 0
  * Re-added host and namespace
  * Minimal samples.
  * Removed long line
  * Added launch to extras
  * 0.2.6
  * Changes.
  * Switched local server to be referenced as loopback in the ROS_DISCOVERY_SERVER envar
  * Add discovery server support
  * assertion error if the hostname is blank (otherwise causes an invalid index exception)
  * Add localhost field which is set automatically
  * Reformat hosts section to single list of all computers
  * 0.2.5
  * Changes.
  * Added battery launch arguments to support launching the valence bms node
  * Add republishers to camera
  * Add IP and Port parameters to manipulator config
  * Added manipulator to config
  * Added methods to replace entries in a dictionary
  * YAML reader properly displays original path in assertions
  * Fix ros_parameters
  * 0.2.4
  * Changes.
  * Install the W200 samples.
  * Fixed j100 and w200 laser sample
  * 0.2.3
  * Changes.
  * Give option to get topic without namespace
  * 0.2.2
  * Changes.
  * Fix how blank urdf extras is handled
  * 0.2.1
  * Changes.
  * Find packages for meshes / extras urdf (#45 <https://github.com/clearpathrobotics/clearpath_config/issues/45>)
    * Allow meshes visual and extras urdf to be linked using find package functionality
  * Added Ridgeback attachments
  * Initial Ridgeback
  * Contributors: Hilary Luo, Luis Camero, Roni Kreinin, Tony Baltovski, luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 19 Sep 2024 04:00:00 -0000

agiros-pixiu-clearpath-config (0.2.11-1noble) noble; urgency=high

  * Adds GQ7 as possible sensor
  * Contributors: robbiefish

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 08 Aug 2024 04:00:00 -0000

agiros-pixiu-clearpath-config (0.2.10-1noble) noble; urgency=high

  * Updated Microstrain link parameter
  * Updated Realsense parameters
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 22 Jul 2024 04:00:00 -0000

agiros-pixiu-clearpath-config (0.2.9-1noble) noble; urgency=high

  * Added Zed to configuration
  * Added Zed as type of camera
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Tue, 28 May 2024 04:00:00 -0000

agiros-pixiu-clearpath-config (0.2.8-1noble) noble; urgency=high

  * Renamed node to intel_realsense in config
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Tue, 14 May 2024 04:00:00 -0000

agiros-pixiu-clearpath-config (0.2.7-1noble) noble; urgency=high

  * Re-added host and namespace
  * W200 attachments default to 0
  * Minimal samples.
  * Removed long line
  * Added launch to extras
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 08 Apr 2024 04:00:00 -0000

agiros-pixiu-clearpath-config (0.2.6-1noble) noble; urgency=high

  * Switched local server to be referenced as loopback in the ROS_DISCOVERY_SERVER envar
  * Add discovery server support
  * assertion error if the hostname is blank (otherwise causes an invalid index exception)
  * Add localhost field which is set automatically
  * Reformat hosts section to single list of all computers
  * Contributors: Hilary Luo

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 18 Mar 2024 04:00:00 -0000

agiros-pixiu-clearpath-config (0.2.5-1noble) noble; urgency=high

  * Add republishers to camera
  * Added battery launch arguments to support launching the valence bms node
  * Fix ros_parameters
  * Contributors: Hilary Luo, Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Wed, 06 Mar 2024 05:00:00 -0000

agiros-pixiu-clearpath-config (0.2.4-1noble) noble; urgency=high

  * Install the W200 samples.
  * Fixed j100 and w200 laser sample
  * Contributors: Roni Kreinin, Tony Baltovski

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 22 Jan 2024 05:00:00 -0000

agiros-pixiu-clearpath-config (0.2.3-1noble) noble; urgency=high

  * Give option to get topic without namespace
  * Contributors: Hilary Luo

 -- Luis Camero <lcamero@clearpathrobotics.com>  Wed, 10 Jan 2024 05:00:00 -0000

agiros-pixiu-clearpath-config (0.2.2-1noble) noble; urgency=high

  * Fix how blank urdf extras is handled
  * Contributors: Hilary Luo

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 08 Jan 2024 05:00:00 -0000

agiros-pixiu-clearpath-config (0.2.1-1noble) noble; urgency=high

  * Find packages for meshes / extras urdf (#45 <https://github.com/clearpathrobotics/clearpath_config/issues/45>)
    * Allow meshes visual and extras urdf to be linked using find package functionality
  * Contributors: Hilary Luo

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 04 Jan 2024 05:00:00 -0000

agiros-pixiu-clearpath-config (0.2.0-1noble) noble; urgency=high

  * Added wheel parameter to platform
  * Fixed typo
  * Added dd150 samples
  * Added dd100 samples
  * Fixed origin of pacs mounts
  * Renamed SLA on Dingo
  * Added entries for all dingo
  * Updated sample to match attachments rework
  * Fixed merge issues
  * Added more warthog samples
  * Updated sample default_mount
  * Removed duplicate
  * Added W200 attachments
  * Updated default mounts on j100
  * Updated default mounts on a200
  * Changed default parent link to default_mount
  * Changed the parent link of attachments
  * Removed blannk line
  * Removed top_plate from tests
  * Updated samples
  * Common attachments accross platforms
  * Concatenate lists
  * Updated all platform attachments
  * Updated base attachment
  * Attachments now list
  * Updated Attachments to more genric case
  * Removed specific attachment classes
  * Remove all from list
  * Accessory from/to dict
  * Fixed long line for linter
  * Moved username out of ros2 section
  * Re-define DEFAULTS based on platform
  * Detailed errors
  * Fixed typo in samples
  * Updated battery model
  * Switched configurations
  * Update commit
  * Revert "Added battery to platform"
    This reverts commit fce11835ca8d6c477890084761075b5b46532bf2.
  * Added battery to platform
  * Added control section
  * Consistent naming
  * Added topics to base and fixed typos
  * Added get_topic and get_topic_rate
  * Added TOPICS and get_topic
  * Added description and launch to generic robot platform
  * Added Warthog without Attachments or ROS Parameters
  * Contributors: Luis Camero, luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 07 Dec 2023 05:00:00 -0000

agiros-pixiu-clearpath-config (0.1.1-1noble) noble; urgency=high

  * Removed micro_ros_ws
  * Velodyne changes
  * clearpath_config/sensors/types/lidars_2d.py
  * FPS expected as float
  * Added ros_parameter_template
  * Contributors: Hilary Luo, Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 02 Oct 2023 04:00:00 -0000

agiros-pixiu-clearpath-config (0.1.0-1noble) noble; urgency=high

  * Updated samples to include workspace
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 31 Aug 2023 04:00:00 -0000

agiros-pixiu-clearpath-config (0.0.6-1noble) noble; urgency=high

  * Added all modules to setup.py
  * Removed J100 bumpers from samples
  * Updated sample configs
  * Added posts and disks to samples
  * Removed unused include
  * Split tower into post and disk
  * Renamed ust10 to ust
  * Updated README
  * Updated samples
  * Removed eof line
  * Fixed port paths
  * Added fenders, default disabled
  * Added ROS CI, issue templates and codeowners.
  * Added sick stand and variable-leg tower
  * Added UM7/UM6
  * Contributors: Luis Camero, Tony Baltovski

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 10 Aug 2023 04:00:00 -0000

agiros-pixiu-clearpath-config (0.0.5-1noble) noble; urgency=high

  * Split novatel GPS
  * PyTest issues
  * Linter issues
  * Node names and flatten dictionaries
  * Added ros_parameters to extras
  * Added Garmin and Novatel gps
  * Added node names to rosparameters in sensors
  * Update hostname and namespace to match serial
  * Resolved indexing issue
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 31 Jul 2023 04:00:00 -0000

agiros-pixiu-clearpath-config (0.0.4-1noble) noble; urgency=high

  * Added __init__ to common
  * Only run pytest on clearpath_config
  * Linting errors
  * Added samples to installed share
  * Removed parser
  * Updated pytests
  * Renamed configs
  * Added license file
  * Added license headers
  * Renamed accessories to links in top level config
  * Replaced accessories module with links
  * Renamed decorations and accessories
  * Standard lists
  * Removed all old samples
  * Added workspace setter
  * Added workspaces
  * Fixed rpy type
  * Removed copy
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 17 Jul 2023 04:00:00 -0000

agiros-pixiu-clearpath-config (0.0.3-1noble) noble; urgency=high

  * Fixed parsing issues
  * Added python3-yaml to dependencies
  * Removed old parser
  * Removed unused code
  * Added updates to change indexing based on serial number
  * Added sensors to property system
  * Added __init__ to all subfolders
  * Added mounts to main config
  * Moved mount types to separate folder
  * Added read and write functions to ClearpathConfig
  * Added accessories to property method
  * Updated all configs to use properties instead of setters
  * Updated base config to use properties to update config
  * Updated clearpath config to property setters
  * Removed old common and updated serial number type
  * Updated system to use global serial number
  * Updated platform to property setters
  * Changed System config to property setters
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 06 Jul 2023 04:00:00 -0000

agiros-pixiu-clearpath-config (0.0.2-1noble) noble; urgency=high

  * Fixed gps indexing
  * Added system ROS2 parameters
  * Decorations enabled by default
  * Added resource and package.xml to install data files
  * Contributors: Luis Camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Mon, 12 Jun 2023 04:00:00 -0000

agiros-pixiu-clearpath-config (0.0.1-1noble) noble; urgency=high

  * Merge pull request #17 <https://github.com/clearpathrobotics/clearpath_config/issues/17> from clearpathrobotics/readme
    Updated README with up-to-date configs
  * Merge pull request #16 <https://github.com/clearpathrobotics/clearpath_config/issues/16> from clearpathrobotics/ros2
    ROS2 Package
  * Merge pull request #15 <https://github.com/clearpathrobotics/clearpath_config/issues/15> from clearpathrobotics/controller
    Controller
  * Merge pull request #14 <https://github.com/clearpathrobotics/clearpath_config/issues/14> from clearpathrobotics/accessory
    Accessory
  * Add metadatat to  setup.py
  * Added ROS tests
  * Updated cfg with install directories
  * Added package.xml
  * Fixed decoration parser
  * Fixed Decoration parsing
  * Linter errors
  * Added controller
  * Added Accessories to YAML
  * Added all lists for Accessories
  * Fixed type assertion
  * Updated link to common BaseAccessory
  * Added visual file path
  * Added check for triple values
  * Add Mesh
  * Added Sphere
  * Added Cylinder
  * Added Box
  * Added
  * BaseAccessory
  * Updated sample config
  * Added  to decorations
  * Set 'None' does nothing
  * Decorations are now Accessories
  * Merge pull request #13 <https://github.com/clearpathrobotics/clearpath_config/issues/13> from clearpathrobotics/gps
    Added GPS
  * Default microstrain port to
  * Added Fixed and Target frame to Velodyne
  * Fixed GPS ros_parameter keys
  * Merge pull request #12 <https://github.com/clearpathrobotics/clearpath_config/issues/12> from clearpathrobotics/lidar_3d
    Lidar3D
  * Added GPS
  * Added Lidar3D to sample config
  * Parse Lidar3D
  * Added lidar3d
  * Updated Port to ensure always stores
  * Merge pull request #11 <https://github.com/clearpathrobotics/clearpath_config/issues/11> from clearpathrobotics/imu
    IMU
  * Add IMU to get_all_sensors
  * Merge pull request #10 <https://github.com/clearpathrobotics/clearpath_config/issues/10> from clearpathrobotics/ros_parameters
    ROS Parameters
  * Added check to increment IMU index
  * Added IMU to sample A200 config
  * Minor fix to return type
  * Added IMU to parser
  * Removed checking for nested parameters (assume flattened ros_parameters)
  * Flatten ros_parameters dict
  * Added flatten dict
  * Added  to Realsense
  * Fixed camera return type
  * Initial IMU commit
  * Added frame_id to parser
  * Fixed comments
  * Added FRAME_ID
  * Added ros_parameters to config
  * Parse ros_parameters
  * Added ros_parameters
  * Merge pull request #9 <https://github.com/clearpathrobotics/clearpath_config/issues/9> from clearpathrobotics/indexing
    Indexing
  * Added ros_parameters as empty dict
  * Added empty config
  * Mounts, sensors, and decorations no longer required
  * Sensors use IndexedAccessory and can have first index changed
  * All mounts have indexes
  * Created IndexedAccessory as base to all iterable accessories
  * Use built-in set and get for idx
  * Merge pull request #8 <https://github.com/clearpathrobotics/clearpath_config/issues/8> from clearpathrobotics/wip-iterable-sensors
    Iterable Sensors
  * Removed tests for older versions of python
  * Fixed imports for Decoration tests
  * Manufacturer names added to sensor models and class names
  * Sensor Types and Sensor Models
  * Updated setuptools
  * Fixed  get_all_sensors
  * Added __init__
  * added sensors to clearpath config
  * Added sensors to the parser
  * Fixed bug in get function
  * Added OrderedList of sensors with access functions
  * Added sensors
  * Added sub-type models
  * Added SENSOR_MODEL
  * Added Port class
  * Added Base class for lidars and cameras
  * Added sensors
  * Added Topic, URDF Enable, and Launch Enable to BaseSensor
  * Init Sensors
  * Merge pull request #7 <https://github.com/clearpathrobotics/clearpath_config/issues/7> from clearpathrobotics/wip-iterables
    Iterables
  * Removed height from Husky sample
  * Updated A200 sample
  * Added get_enabled
  * Added method to retrieve all decorations
  * Added Decoration.NEW class
  * Added method to retrieve all mounts
  * Set decorations to enabled if not specified but exist
  * Fixed top plate in parser
  * Added BaseDecoration; by default disabled
  * Added __init__ to mounts
  * Updated A200 sample
  * Fixed key error print statement
  * Upgraded parser to match new mounts
  * Removed name as required argument
  * Completely disabled all PACS testing
  * Removed 'pacs_' prefix from brackets and risers
  * BaseMount no longer requires a name, default to index
  * Clear OrderedConfigList if empty list is set
  * Updated sample to new mount iterables
  * Added mounts as individual ordered lists
  * Moved ListConfig and all PACS from the Platform base
  * Removed PACS from platform
  * Removed name as a default parameter
  * Added name from id to BaseMount
  * Added OrderedListConfig
  * Removed mounting link from fath and flir moutns
  * Removed mounting link and model
  * Added uid checks to ListConfig
  * Split up mounts
  * Added get and set methods for individual mounts
  * Small lint fixes in common
  * Removed mount pseudo namespace
  * Updated remove function
  * Moved ListConfig
  * Fixed lint errors in mounts
  * Fixed lint errors in clearpath_config
  * Removed PACS Config testers
  * Switched parser to new decorations config
  * Updated path to base decorations config
  * Updated path to config in Platform
  * Updated J100 to iterable decorations
  * Updated A200 to iterable decorations
  * Fixed assertion indenting
  * Removed unused imports
  * Fixed assertion indenting
  * Added get and set functions to ListConfig
  * Removed PACS specific configs
  * Added base decorations config
  * Removed unecessary platform specific decorations
  * Merge pull request #5 <https://github.com/clearpathrobotics/clearpath_config/issues/5> from clearpathrobotics/wip-mounts
    Mounts: Flir PTU and Fath Pivot
  * Fixed merge issues
  * Added mounts config
  * Added mounts to sample config
  * Added platform parser
  * Added  check to Accessory
  * Merge branch 'main' of https://github.com/clearpathrobotics/clearpath_config into main
  * Remove old test config yaml
  * Merge pull request #4 <https://github.com/clearpathrobotics/clearpath_config/issues/4> from clearpathrobotics/wip-lint
    Lint Errors and Warnings
  * Increased flake8 line length to 100
  * Fixed all lint errors
  * Merge pull request #3 <https://github.com/clearpathrobotics/clearpath_config/issues/3> from clearpathrobotics/wip-tests
    Moved tests into the clearpath_config package
  * Added PyYaml
  * Added pytest-cov
  * Create python-package.yml
  * Moved tests into the clearpath_config package
  * Merge pull request #2 <https://github.com/clearpathrobotics/clearpath_config/issues/2> from clearpathrobotics/wip-platform
    Added Platform and Updated Parser
  * Added init files to submodules
  * Updated setuptools
  * Removed unused unittest dependency
  * Added platform config tests
  * Added sets to all PACS parts and configs
  * Added checks on bumper extension
  * Renamed genx to generic in platform
  * Renamed genx to generic in common
  * Renamed GENX to generic
  * Added a200 and j100 sample config
  * Added J100 to parser
  * Changed import path to match new file structure
  * Added A200, J100, and GENX (generic)
  * Moved platform and system to new folder structure
  * Changed parser to math new folder structure
  * Fixed RPY and XYZ setters
  * Changed import for the new folder structure
  * Platforms referenced only by product code, i.e. A200, to avoid version issues
  * Use setters to initialize Accessory
  * Merge pull request #1 <https://github.com/clearpathrobotics/clearpath_config/issues/1> from clearpathrobotics/wip-object-structure
    Split Parsing and Config Containers
  * Updated sample config to match changes
  * Added extras to parser
  * Default extras file paths set to empty strings
  * Fixed File class __str__ method
  * Moved everything out of Parser class, and added Parser suffix
  * Swap to multi-class inheritance for PACS configs
  * Removed parsing from clearpath_config
  * Fixed bugs in setting remotes
  * Added Platform Config, Only Husky and Jackal
  * Changed prefix to name
  * Added Accessory class
  * Added Platform to common
  * Added File and SerialNumber classes
  * Added proper spacing
  * Added too many fields test
  * Regex expression set to raw string
  * Fixed SystemConfig init
  * Added check that hostname must be str
  * Fixed initialization of HostConfig
  * Removed checks from parser
  * Added UnitTest information to README
  * Removed utils
  * Added tests for SystemConfig
  * Moved all class files out of base
  * Added keys
  * Moved version
  * Initial config parser structure
  * Initial commit
  * Contributors: Luis Camero, luis-camero

 -- Luis Camero <lcamero@clearpathrobotics.com>  Thu, 04 May 2023 04:00:00 -0000


